AIS Pilot Plug to USB Cable

The AIS Pilot Plug Cable is intended to receive any data from mobile AIS stations Class A or B. It gives the simple way to connect the mobile ship AIS station to your PC, laptop or desktop.

AIS Pilot Plug outlet to USB Cable.

AIS Pilot Plug Cable Features

- The AIS Pilot Plug Cable supports RS-422 and RS-485 interfaces by means of switcher.

- The cable allows to connect the GPS receivers to PC through the USB port to display and use the coordinates

- Cable's length is 1.5 meters

Complete set

- Cable AIS Pilot Plug outlet - USB

- User manual in English

- Drivers

General Specifications

- The AIS Pilot Plug Cable supports RS-422 and RS-485 interfaces by means of switcher

- The cable allows to connect the GPS receivers to PC through the USB port to display and use the coordinates

- Cables length is 1.5 meters

No files avaliable for this product.

Other Products

EPIRB PRO-5 Float Free

Pro-5 Float Free Satellite Emergency Position Indicating Radio Beacon (EPIRB) measures up with the IMO requirements for COSPAS-SARSAT system and is a mandatory item in the GMDSS (Global Maritime Distress Safety System). When a distress beacon is activated, it transmits a distress radio signal that is detectable by satellites. The beacon is brought into action automatically to transmit distress signal (position and identity) at depth of 4 meters or more. This equipment guarantees high-speed identification by means of the unique code of each beacon, positioning to within one nautical mile with short response time.

AIS-SART Musson-502A

Our company has developed completely new maritime safety equipment AIS-SART Musson-502A, which is mandatory item to be installed on ship. The AIS-SART Musson-502A operates in A and B VHF channels of AIS (automatic identification system), instead of standard search and rescue radar transponder operating in 9.2-9.5GHz. The new AIS-SART fully corresponds to IMO, SOLAS and GMDSS requirements. AIS-SART Musson 502A uses the built-in GPS module to send messages with coordinates of distress to near vessels' AIS.

Hydrostatic Release Unit G-5

The G-5 Hydrostat is an automatic release device for use with Liferafts, EPIRBs and other equipment. Used for Emergency Position Indicating Radio Beacons (EPIRB). Should the vessel sink, the G-5, which is activated by increasing water pressure, will automatically release the EPIRB. On reaching the surface the EPIRB starts to emit a signal of identification and position to a satellite.

Hydrostat for SM-511

Hydrostatic release device for SM – 511 (COSPAS-SARSAT certificate #№ 96) State Designer's Bureau of Radio-communication. Hydrostate for SM– 511-world’s first compatible collet hydrostat for float-free 406MHz EPIRB was designed by department former engineer Vladimir Shchegolev in 1995. This device is complete analog to ЕВ-10 EPIRB’s hydrostats manufactured by Saracom (COSPAS-SARSAT certificate #94) which is also used in EPIRB EB-20, EB-20 SVDR Capsule (COSPAS-SARSAT certificate #182).
GMDSS Testers All in One


AIS, BEACON, SART, GMDSS Test equipment

Our company offers a range of maritime test devices intended for complex testing of GMDSS Equipment in accordance with IMO and SOLAS requirements.

Our test devices are capable to test automatic identification systems (AIS), AIS-SARTs, all 406MHz Cospas-Sarsat beacons, 9GHz search and rescue transponders (SART), and MF/HF and VHF GMDSS radios with DSC.

Testers are designed for ship surveyors, beacon suppliers, classification societies and administrative authorities.



We offer special equipment that mainly used by laboratories or manufacturers for quality control in production.

High accuracy professional 406MHz BEACON Tester BT-611M indended to check beacon compliance with the requirements, specified in C/S doc. T.001, T.007. AIS-SART Tester Pro Lab Tester is device used for verification of AIS and AIS-SART parameters in real time.

GALILEO REFERENCE BEACON GENERATOR BG-105/102 is high-precision simulator of Cospas-Sarsat emergency beacon messages.