EPIRB PRO-5 Float Free

Pro-5 Float Free Satellite Emergency Position Indicating Radio Beacon (EPIRB) measures up with the IMO requirements for COSPAS-SARSAT system and is a mandatory item in the GMDSS (Global Maritime Distress Safety System). When a distress beacon is activated, it transmits a distress radio signal that is detectable by satellites. The beacon is brought into action automatically at depth of 4 meters or more and transmits distress signal (position and identity). This equipment guarantees high-speed identification by means of the unique code of each beacon, positioning to within one nautical mile with short response time.

 

General Specification:

Message format: MMSI, Serialised, Call Sign
Programming: Easy remote programming
Temperature: Opearting: -30°C to 55° Class 2
Storage: -50°C to +70°C
Battery: Lithium, to be replaced every five and a half years, 48 hours operation
Hydrostat: Hammar H20
Weight with bracket: 2.2kg (Including the weight of Hammar 20)
Weight with bracket: 2.0kg (EPIRB weight - 1kg, Bracket weight - 1kg)
Warranty period: 5 years

Technical Specification:

406MHz Transmitter
Frequency 406.028MHz+/-1kHz
Output Power 5 Watts +/-2dB
Modulation Biphase 1.1 +/-0.1 radians
Data Encoding Bi phase L
Antenna External vetical whip
121.5MHz Transmitter
Frequency 121.5MHz+/-3KHz
Output Power 50mW
Modulation AM, or sweep tone
Strobelight
Effective intencity >1 candela
Flash Rate <23 flashes per minute

Approvals:

Complies with IMO resolutions A662(16), A694(17), A810 (19)
Complies to COSPAS-SARSAT C.S.T.001 and T.007
Wheel Mark Approval

No files avaliable for this product.

Other Products

AIS-SART Musson-502A

Our company has developed completely new maritime safety equipment AIS-SART Musson-502A, which is mandatory item to be installed on ship. The AIS-SART Musson-502A operates in A and B VHF channels of AIS (automatic identification system), instead of standard search and rescue radar transponder operating in 9.2-9.5GHz. The new AIS-SART fully corresponds to IMO, SOLAS and GMDSS requirements. AIS-SART Musson 502A uses the built-in GPS module to send messages with coordinates of distress to near vessels' AIS.

Hydrostatic Release Unit G-5

The G-5 Hydrostat is an automatic release device for use with Liferafts, EPIRBs and other equipment. Used for Emergency Position Indicating Radio Beacons (EPIRB). Should the vessel sink, the G-5, which is activated by increasing water pressure, will automatically release the EPIRB. On reaching the surface the EPIRB starts to emit a signal of identification and position to a satellite.

Hydrostat for SM-511

Hydrostatic release device for SM – 511 (COSPAS-SARSAT certificate #№ 96) State Designer's Bureau of Radio-communication. Hydrostate for SM– 511-world’s first compatible collet hydrostat for float-free 406MHz EPIRB was designed by department former engineer Vladimir Shchegolev in 1995. This device is complete analog to ЕВ-10 EPIRB’s hydrostats manufactured by Saracom (COSPAS-SARSAT certificate #94) which is also used in EPIRB EB-20, EB-20 SVDR Capsule (COSPAS-SARSAT certificate #182).

AIS Pilot Plug to USB Cable

The AIS Pilot Plug Cable is intended to receive any data from mobile AIS stations Class A or B. It gives the simple way to connect the mobile ship AIS station to your PC, laptop or desktop. The AIS Pilot Plug Cable supports RS-422 and RS-485 interfaces by means of switcher.
GMDSS Testers All in One

MARITIME GMDSS TESTERS

AIS, BEACON, SART, GMDSS Test equipment

Our company offers a range of maritime test devices intended for complex testing of GMDSS Equipment in accordance with IMO and SOLAS requirements.

Our test devices are capable to test automatic identification systems (AIS), AIS-SARTs, all 406MHz Cospas-Sarsat beacons, 9GHz search and rescue transponders (SART), and MF/HF and VHF GMDSS radios with DSC.

Testers are designed for ship surveyors, beacon suppliers, classification societies and administrative authorities.

SPECIAL EQUIPMENT

406MHz BEACON Monitor, GALILEO REFERENCE BEACON GENERATOR BG-105/102, AIS Tester Pro Lab

We offer special equipment that mainly used by laboratories or manufacturers for quality control in production.

High accuracy professional 406MHz BEACON Tester BT-611M indended to check beacon compliance with the requirements, specified in C/S doc. T.001, T.007. AIS-SART Tester Pro Lab Tester is device used for verification of AIS and AIS-SART parameters in real time.

GALILEO REFERENCE BEACON GENERATOR BG-105/102 is high-precision simulator of Cospas-Sarsat emergency beacon messages.