SART Tester (discontinued)

The SART Tester allows to:
- measure the carrier frequency of response in range of 9140...9560MHz;
- measure the duration of response in range of 50...150 microseconds;
- indicate the power level in range of 300...950mW;
- calculate the quantity of sweep frequency points in the response;
- control the power supply voltage with displaying on LCD;
- print the full protocol of the device test.

NATO Serial Number: 6625-12-379-2933

Measurements of SART parameters are made through the broadcast.

The International Marine Organization requires that all GMDSS radio equipment is maintained to ensure that it meets the appropriate performance requirements. In the event of test failure, ships may be detained in port.

Now with the help of SART Tester it is possible to test the SART to ensure it meets the appropriate performance requirements.
The SART Tester is portable and easy in use. It is far more effective than the primitive self-test function offered by any SART.
The Test results shown on LCD Display or printed make easy the further analysis of the SART efficiency.
The SART Tester provides measurement of the carrier frequency, duration and power of the response. The device has small dimension and can be easily placed in hand.

 

General Specification

Tester allows reception the signal within the range of 9140…9560Mhz frequencies;

The current consumption of the device power supplied by batteries (built-in battery 6V) in standby mode is < 85mA and in measurement mode is < 270mA.

The built-in battery of the device can be charged by power supply adaptor from 220V AC network. Maximum battery charging time does not exceed 16 hours.

The device guarantees the accuracy of voltage monitoring and indication on liquid crystal display within ±5%. 
Measurement of SART parameters is made through the broadcast by means of antenna.

According to service conditions the device is designed for operation in the internal shielded ship rooms at the temperature +5°С...+55°С, and relative air humidity of 95%.

Downloads

Drivers (version: 1; ; ) Drivers to create virtual com port for direct connection
Here you can download latest version of software for SART Tester. No installation is required. OS Windows. Note: Limited access. Login for downloading the item.
Specifications / Brochure (version: 1.0; 11.03.2011; 220 kb) Complete specification and advertising brochure of SART Tester. Available in PDF format.
Complete technical description and operation user manual for RADAR SART Tester is available in PDF format. Note: Limited access. Login for downloading the item.
Test report example (version: 1.1; 11.03.2011; 94 kb) Examples of test reports created by SART Tester Software. The test report is important logical completition of test process.

Other Products

AIS Tester

AIS Tester is a test device operating on AIS1 (ch87B), AIS2(ch88B) and DSC(ch70) frequencies. The tester is designed under corresponding standards and recommendations as a tool of operation and installation tests of AIS unit (Automatic Identification System). The tests’ volume complies with “Guidelines on annual testing of the AIS unit MSC.1/Circ.1252”.

GMDSS Tester MRTS-7 (discontinued)

MF/HF/VHF DSC Marine Radio Test System (MRTS-7) is designed to check the MF/HF/VHF stations with DSC by means of SENDING/RECEIVING of DSC messages on all allowed frequencies. Besides of that Test system can be used as frequency meter and HF oscillator.

406MHz BEACON Tester

406MHz SARSAT BEACON TESTER is designed to check the maritime emergency radio beacons operating via COSPAS-SARSAT system such as Emergency Position Indicating Radio Beacon (EPIRBs). Allows to perform annual testing according to requirements for shore-based maintenance under IMO Circular 10/40 and other resolutions requirements. Also allows fast check after beacon’s encoding or installation.

EPIRB Tester Mini

Easy testing of the maritime emergency radio beacons operating via COSPAS-SARSAT system. It is really portable. Wi-Fi supported. Use your mobile phone or tablet to check the beacons and make IMO test reports.

GMDSS Tester MRTS-7M

GMDSS Multi Tester MRTS-7M is the first hand-held Multi Tester enabling the testing of all GMDSS equipment: AIS Stations, EPIRBs, VHF and MF/HF Radios with DSC, AIS-SART and NAVTEX. The cutting-edge software is compatible with all operation systems. Automatic generation of test reports for all the range of tested equipment. And all reports are in IMO-required format. Less paper work, more surveys!

SART Tester STU-1

This PC-operated device enables accurate measurement of 9GHz SART's parameters and makes a conclusion whether the SART is operable according to the IMO Resolution A.802(19) and SOLAS - 74/88. The STU-1 is very compact and lightweight test tool providing reliable check of any Radar-SART.
GMDSS Testers All in One

SAFETY EQUIPMENT

AIS-SART, EPIRB, HRU G-5

Our company has developed completely new maritime safety equipment AIS-SART Musson - 502A, which operates in A and B VHF AIS channels.

Also we manufacture float Free Satellite Emergency Position Indicating Radio Beacon (EPIRB) under the IMO requirements for COSPAS-SARSAT system, a mandatory item in the GMDSS (Global Maritime Distress Safety System). Certified and type approved.

SPECIAL EQUIPMENT

406MHz BEACON Monitor, GALILEO REFERENCE BEACON GENERATOR BG-105/102, AIS Tester Pro Lab

We offer special equipment that mainly used by laboratories or manufacturers for quality control in production.

High accuracy professional 406MHz BEACON Tester BT-611M indended to check beacon compliance with the requirements, specified in C/S doc. T.001, T.007. AIS-SART Tester Pro Lab Tester is device used for verification of AIS and AIS-SART parameters in real time.

GALILEO REFERENCE BEACON GENERATOR BG-105/102r is high-precision simulator of Cospas-Sarsat emergency beacon messages.